INDIGO Dashboard



INDIGO Dashboard is a versatile tool for a low level control of embedded or remote INDIGO Servers. It combines the server itself, the control panel and the set of up to eight configurable dashboard workspaces. Each of them can contain any number of property widgets pinned from the control panel and arranged according your need.

It can control many devices supported by built-in INDIGO drivers. Out-of-the-box it contains INDIGO drivers for the following devices:

  • CCD, focuser, wheel, rotator, mount, gps and dome simulator drivers,
  • Atik CCD and wheel drivers,
  • ZWO ASI CCD, wheel, focuser and guider drivers (doesn't work with non-S ASI120MM/MC),
  • IIDC CCD driver (both USB and FireWire cameras),
  • QHY CCD and filter wheel drivers,
  • SBIG CCD and filter wheel driver,
  • Meade DSI CCD driver,
  • Orion SSAG/QHY5 CCD driver,
  • StarlightXpress CCD, wheel and AO drivers,
  • QSI CCD and wheel driver,
  • FLI CCD, wheel and focuser driver,
  • Apogee CCD driver,
  • Moravian Instruments CCD and wheel driver,
  • ToupTek CCD driver,
  • AltairAstro CCD driver,
  • UVC (USB Video Class, e.g. SVBONY SV205) CCD driver,
  • PTP-over-USB CCD driver for Canon, Nikon and Sony Alpha cameras,
  • Trutek (TruTech) wheel driver (untested),
  • Brightstar Quantum wheel driver (untested),
  • Xagyl wheel driver (untested),
  • Optec wheel driver (untested),
  • Manual filter wheel driver,
  • EQMac guider driver (obsoleted on macOS Mojave),
  • CG-USB-ST4 driver,
  • Shoestring GPUSB, FCUSB and DSUSB drivers,
  • Focuser USB v3 driver,
  • WeMacro Rail USB and BT drivers,
  • MJKZZ macro rail USB and BT drivers,
  • PegasusAstro DMFC, UPB, PPB and FlatMaster drivers,
  • RigelSys nSTEP and nFOCUS drives,
  • MoonLite focuser driver,
  • Optec focuser driver (untested),
  • LakesideAstro focuser driver (untested),
  • Deep Sky Dad AF1, AF2 and AF3 focuser driver,
  • Baader Planetarium SteelDrive II focuser and Classic dome drivers,
  • AstroGadget FocusDreamPro focuser driver,
  • Lunatico Limpet/Armadillo/Platypus Focuser/Rotator/Powerbox drivers,
  • PlaneWave/Celestron focuser driver,
  • LX200 mount driver (supports Meade, AvalonGo, Losmandy Gemini, 10micron, EQMac, Astro-Physics GTO and OnStep dialects),
  • NexStar mount driver (supports Celestron and Skywatcher dialects),
  • Takahashi Temma mount driver,
  • iOptron Mount driver,
  • SynScan/EQDir mount driver,
  • ExploreScientific PCM8 mount controller driver,
  • Generic NMEA 0183 GPS driver,
  • GPS Service Daemon (GPSD) client driver,
  • HID Joystick driver,
  • RTS-on-COM shutter driver,
  • Unihedron SQM sky quality meter driver,
  • Artesky flatbox driver,
  • Lacerta Flat Box Controller driver,
  • Optec Flip-Flat driver,
  • USB_Dewpoint V1 and V2 driver,
  • Lunatico AAG CloudWatcher driver,
  • Lunatico Astronomia Dragonfly Dome and Relay controller drivers,
  • Astromi.ch MGBox v1/v2, MBox, MGPBox and PBox driver,
  • NexDome Dome driver (based on G.Rozema's firmware),
  • NexDome Dome driver (requires firmware v.3.0.0 or newer),
  • Modernised 2-m Class Zeiss Telescope Systems (ASCOL).
but it can control also any remote device with INDIGO or INDI driver.

To run INDIGO Dashboard you need Apple Mac running macOS Sierra or later.

You can read Getting Started or watch video tutorial to learn more and if you will have any problem with some of our products do not hesitate to contact us on info@cloudmakers.eu, users group forum.

You may be also interested in the INDIGO Control Panel application to read or set device properties. Read more »


To build a distributed setup, you may need INDIGO Server pplication. Read more »